[% title = 'Steve Morse equipment' %]

Steve Morse equipment

GUITARS

.010 strings on all guitars.

AMPS & SPEAKERS

Steve's guitar is directly connected (via cable) to a Peavey 5150 amp (a small Boss tuner can be chosen with an A/B-Box). The high/low gain control on the amp is controlled via a foot switch. One extra 5150 is brought along as back-up.

4 speaker cabinets are connected to the amps:

EFFECTS

The Preamp-signal of the 5150 is sent to a mono-effect , which is usually mainly used during Steves solo spot:

The volume for each of the effect units is controlled by an Ernie Ball volume pedal. Another volume pedal is used for setting the delay time of the PCM42. All effects are connected to a passive 4-in-1 mixer, which sends the signal to a second Peavey VTM120 amp with 2 4x12" Black Widow cabinets.

Found in German Gitarre & Bass 6/1996, june, p.79, reported by Thorsten Nickel.

     \\||//
     ~~..'~
     (  \ )
      \ c/
     __\/__
    /      \
  _< .   _  \
  \`\ \-'/ \ \   ,,,_
   >|""O[|||||nn[:::<
  /_,---._\      '''~
  ~  |     |
     |  | |
     |  |  |
    /  /|  )
  _/_ /_|__|__
 /           /\
/___________/  |
\___________\__| 


hey , what happened to steve's hair ?